Upatix 250ml Brunitore a Freddo per Metalli Soluzione Riflessante
CODICE: UPATIX250ML
E’ una soluzione acida riflessante per la brunitura a freddo di viti, bulloni e di tutti quei particolari in metallo che servono per il restauro di auto e moto
o per creare un effetto annerito.
Ottimo per la brunitura su ferramenta zincata, in quanto non serve proteggere successivamente i pezzi trattati con protettivi bloccaruggine.
Nel caso in cui si dovesse usare su ferramenta non trattata( nera) , bisognerà successivamente proteggerla o con il nostro TIT OIL oppure con un trasparente tipo il nostro TINTAMOTOR
a seconda dell’effetto che si vuole ottenere ( lucido od opaco).
Nella foto si può vedere il pezzo PRIMA e DOPO il trattamento.
Sgrassare bene la superfice da trattare con solvente nitro,evitare di toccare con le mani nude ( usare dei guanti) per non rilasciare il grasso naturale che andrebbe ad inficiare il risultato finale, quindi immergere per qualche minuto fino al raggiungimento della tonalità desiderata.
Non utilizzare a temperature inferiori a 15°, se necessita riscaldare il pezzo per aumentare la reazione chimica, poi lavare con acqua ed eventualmente proteggere come descritto sopra.
CODE: UPATIX250ML
It is a reflecting acid solution for the cold burnishing of screws, bolts and all those metal details that are used for the restoration of cars and motorcycles
or to create a blackened effect.
Excellent for burnishing on galvanized hardware, as there is no need to subsequently protect the treated pieces with protective rust inhibitors.
In the event that it is to be used on untreated (black) hardware, it will then be necessary to protect it either with our TIT OIL or with a transparent product such as our TINTAMOTOR
depending on the effect to be obtained (glossy or opaque).
In the picture you can see the piece BEFORE and AFTER the treatment.
Thoroughly degrease the surface to be treated with nitro solvent, avoid touching with bare hands (use gloves) in order not to release the natural fat which would affect the final result, then immerse for a few minutes until the desired shade is achieved.
Do not use at temperatures below 15°, if necessary heat the piece to increase the chemical reaction, then wash with water and eventually protect as described above.
Recensioni
Ancora non ci sono recensioni.